Preparing for Automation
240 FTB-2/FTB-2 Pro and FTB-4 Pro
Changing Communication Settings
4. Under Communication Type, select ActiveX, RS-232, or TCP/IP.
For more information on the choice of a particular type, see the table
on page 234.
Note: If the selected communication type does not match the protocol that will
actually be used, an error message is displayed when attempting to control
the instruments.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
