EXFO Optical Explorer - Introducing the OX1 Optical Explorer

Optical Explorer 1
1 Introducing the OX1 Optical
Explorer
The OX1 Optical Explorer is a handheld, ultra-simple, and ultra-fast tool
offering multiple test functions to verify any short- to medium-length (up to
40 km) optical links and their components. It is particularly well suited for
installation and repair jobs.
It can work in association with a smart device equipped with the EXFO
TestFlow mobile application allowing you to document the test results,
archive them, and generate reports.
At any time, you can switch from local measurements (that are not part of
a TestFlow job) to measurements within a TestFlow job. All the
measurements are kept in memory. You can also open, in turn, the power
checker and the source page.
Note: Depending on the type of smart device you are using, the appearance of the
Optical Explorer tool (available from the TestFlow mobile application) may
vary slightly from the illustrations presented in this documentation. Unless
otherwise specified, the information applies both to the Android- and
iOS-based smart devices.
Note: Both on your unit and in the TestFlow mobile application, the period is used
as the decimal separator in numerical values, when applicable.