EXFO Optical Explorer - Configuring Your Unit at First Startup

To Next Page

To Previous Page

Getting Started with Your Unit

Optical Explorer 23

Configuring Your Unit at First Startup

The first time you turn on the unit, a wizard is displayed, enabling you to set

the operation language, read and accept the EXFO license agreement,

configure the date and time, and select the desired distance units.

Note: You can change the regional parameters later if necessary.

Once the configuration is complete, you are presented with an overview of

the main features of your unit. This getting started guide will be available at

all times from your unit for future reference (see Accessing the Online

Documentation From the OX1 on page 217).

To configure your unit at first startup:

1. If it is not already done, turn on the unit.

2. When the wizard prompts you, select the desired operation language.

If you select a language other than English, the unit will restart

automatically to apply the change.

3. Read and accept the EXFO license agreement, then tap NEXT.

4. Follow the on-screen instructions to configure the other regional

parameters and view the getting started guide.

5. If desired, configure a Wi-Fi network allowing you to retrieve the

updates and archiving your results on the cloud server, as follows:

5a. Install the TestFlow mobile application on your smart device

(see Installing the TestFlow Mobile Application on Your Smart

Device on page 136).

5b. Establish a Bluetooth

connection between the OX1 and the

smart device (see Establishing or Closing a Connection With a

Smart Device Via the Bluetooth Technology on page 137).

5c. Configure a wireless network (see Working With a Wireless

Network on page 145).

You are now ready to start working with your OX1.