Troubleshooting
Optical Explorer 207
Restoring Your Unit to Normal Operation
Restoring Your Unit to Normal Operation
If you ever encounter major problems with your unit (for example, the unit
does not behave the way it used to), you can revert it to its initial state (as it
was at time of purchase).
CAUTION
³ Once the recovery operation is started, it cannot be cancelled.
Make sure to transfer any data that you wish to keep prior to
starting the recovery operation, as they will be permanently
lost.
³ Follow the procedure below carefully and connect your unit to a
power outlet using the provided USB power adapter when you
are instructed to do so.
CAUTION
Electrostatic discharge (ESD) damage can cause complete or
intermittent equipment failures.
³ Always use an ESD-preventive wrist or ankle strap when
opening your unit. Ensure that the antistatic strap makes good
skin contact and that the end of its wire is grounded properly.
³ Never touch any component inside the unit other than those
identified in the procedure hereafter, either with tools or your
fingers.
To Next Page
Loading...