Setting up Your Unit
64 OX1
Working With Custom Pass/Fail Thresholds or EXFO Advisor
Working With Custom Pass/Fail Thresholds or
EXFO Advisor
As soon as a measurement is complete, the application displays a status:
³ Pass
³ Fail
³ Unknown
³ Quality star rating
The application displays a Pass/Fail status when custom thresholds are
applied. It is displayed in the Link Results area and it can be pass, fail, or
unknown. See Working With Link Results on page 96 for details.
You can also let EXFO Advisor rate the quality of the results. The rating
ranges from zero to five stars (half stars are possible).
Note: EXFO Advisor is always applied when working with Flash Advisor.
By default, the link thresholds (loss, length, ORL) are disabled. You can
enable and customize them when you use Fault Xplorer or Link Mapper.
You can also customize thresholds related to the elements (connector loss
and reflectance, splice loss). The threshold values, for both the link and
elements, are applied automatically to all wavelengths and are kept in
memory when you turn off the unit.
To Next Page
Loading...