Working With the TestFlow Mobile Application
Optical Explorer 169
Generating Job Measurement Reports
Generating Job Measurement Reports
You can generate PDF reports with the TestFlow mobile application.
Once the report has been generated, you can consult it right away with the
viewer available on your smart device. Since the PDF is not saved on the
smart device, you will need to generate the report again if you close it,
unless you transfer it with your smart device.
It is possible to generate single- or multi-measurement reports with the
TestFlow mobile application.
To generate job measurement reports:
1. Ensure that a Bluetooth
®
connection has already been established
between your unit and a smart device (see Establishing or Closing a
Connection With a Smart Device Via the Bluetooth Technology on
page 137).
As soon as a connection is established between the OX1 and a smart
device, the list of results in the TestFlow mobile application is refreshed
automatically.
2. On the smart device, if it is not already done, open the TestFlow mobile
application.
To Next Page
Loading...