Introducing the OX1 Optical Explorer
Optical Explorer 11
Using Your OX1 as a Standalone Unit
Using Your OX1 as a Standalone Unit
You can perform measurements for verification using one of the test
functions (Flash Advisor, Fault Xplorer, or Link Mapper), the light source or
the power checker. See Test Functions and Tools on page 10, and Testing
Fibers on page 91.
The results are saved on the OX1 under a sequential name which is limited
to a maximum of 1000 measurements. Once the numeric part of the
measurement names reaches 999, it is reset to 000 automatically.
See Managing Test Results on page 123.
You can generate single-measurement reports with the measurements
stored on your OX1 but you will need a smart device equipped with the
TestFlow mobile application. See Generating Measurement Reports on
page 132.
Using Your OX1 With a Smart Device
You can also use your OX1 in association with a smart device equipped
with the EXFO TestFlow mobile application allowing you to document your
results, archive them on a cloud server, and generate reports (single or
multiple measurements). See Working With the TestFlow Mobile
Application on page 135.
Technical Specifications
To obtain this product’s technical specifications, visit the EXFO Web site at
www.exfo.com.
To Next Page
Loading...