Working With the TestFlow Mobile Application
168 OX1
Deleting Job Measurements
To synchronize job results with the smart device and the cloud
server:
1. Ensure that a Bluetooth
®
connection has already been established
between your unit and a smart device (see Establishing or Closing a
Connection With a Smart Device Via the Bluetooth Technology on
page 137).
As soon as a connection is established between the OX1 and a smart
device, the list of results in the TestFlow mobile application is refreshed
automatically.
2. If necessary, enable the Wi-Fi communication on your unit
(see Enabling or Disabling the Wireless Communication on page 141).
3. On the smart device, open the TestFlow mobile application and access
the Optical Explorer tool.
4. Tap the job you want to synchronize with the cloud server.
5. Once you are in a job, tap one of the bubble corresponding to a test.
6. When the unit prompts you, tap Sync.
Note: If you are not already connected to an OX1 unit, the application will prompt
you to select the unit you want to use.
Note: You can also access the job sync feature from the three-dot menu.
Deleting Job Measurements
You cannot delete manually the measurements that are part of a job. The
application manages automatically the cleanup of the disk space when the
disk is almost full. The oldest tests that have not been synced yet with the
cloud server are removed first. If there is still not enough storage space, the
application deletes the oldest tests that have not been synced yet with the
TestFlow mobile application.
Note: The application cannot delete the job set as current and its associated tests.
To Next Page
Loading...