Troubleshooting
208 OX1
Restoring Your Unit to Normal Operation
To restore you unit to normal operation:
1. If desired, transfer the data that you wish to keep (see Generating
Measurement Reports on page 132 and Synchronizing Job Results With
the Smart Device and the Cloud Server on page 167).
2. Ensure that the battery level of your unit will be sufficient to start the
unit when instructed to do so (no red battery icon on screen or red,
steady LED on the unit’s front panel).
3. Turn off your unit (shutdown).
4. If applicable, disconnect the USB cable. This is necessary to be able to
open the unit as explained hereafter.
5. Position the unit so that its front panel rests on a flat surface such as a
table.
To Next Page
Loading...