Setting up Your Unit
82 OX1
Working With a Demarcation Section
5. Modify the thresholds as follows:
5a. Tap the threshold that you want to modify.
5b. Enter a new value.
5c. Tap OK to return to the Demarcation section page.
6. Use the Allow link < demarcation toggle button to define the behavior
of the unit when it detects the end of the link before the end of the
demarcation.
³ To have the last event identified as the actual end of fiber (Pass),
enable the feature.
³ To have the last event identified as a fiber break (Fail), disable the
feature.
The new settings will be taken into account for the next measurement.
To Next Page
Loading...