Need help?Do you have a question about the Expert Electronics SunSDR2 DX and is the answer not in the manual?
Expresses gratitude for purchasing the SunSDR2 DX transceiver.
Details hardware improvements and main capabilities of the SunSDR2 DX.
Lists the items included with the SunSDR2 DX transceiver in the package.
Outlines essential safety rules and warnings for operating the transceiver.
Specifies the terms and conditions for using the ExpertSDR2 software.
Details the copyrights held by Expert Group for the transceiver and software.
Provides contact details for Expert Group for inquiries and support.
Provides advice on connecting antennas and matching impedance for optimal performance.
Explains the importance of proper grounding for safety and performance.
Details how to connect accessories like PTT footswitches and CW keys.
Instructions for connecting and controlling external linear power amplifiers.
Explains how to use the EXT CTRL connector to control external devices.
Describes connecting a 10 MHz external reference oscillator for frequency stability.
Guides on connecting VHF/SHF transverters via A1, ADC IN, and DAC OUT.
Details the low-power DAC OUT for external amplifiers and signal generation.
Explains the direct receiver input and receiver path output connectors.
Detailed pin configuration for the MIC1 connector.
Detailed pin configuration for the MIC2 connector.
Pin assignments for the EXT CTRL connector for external device control.
Describes the main buttons and controls in the ExpertSDR2 global panel.
Details the various controls and functions within the transceiver control panel.
Explains the display of VFO frequencies, signal levels, and related controls.
Covers AGC and digital filter settings for signal processing.
Details the Spectrum Scope and Waterfall display for signal visualization.
Describes the information displayed in the ExpertSDR2 status bar.
Covers various software configuration options.
Details key receiver parameters like frequency range, ADC type, and sensitivity.
Outlines transmitter parameters such as output power and TX filters.
Provides physical dimensions, weight, power, and operating temperature.
Steps for basic transceiver operation using local connections.
Information on operating the transceiver remotely via a manual link.
Describes methods for tuning frequencies using mouse and spectrum scope.
Explains how the antenna switch operates and its interaction with RX ONLY.
Guides on recording and playing back received signals and microphone audio.
How to use SPLIT mode for receiving and transmitting on different frequencies.
Explains the Receive and Transmit Incremental Tuning functions.
Information on operating digital modes with third-party software.
Details the built-in safety features and protections of the transceiver.
Provides paths to profile and options files for different operating systems.
Instructions for setting up and running two transceivers on a single PC.
General| Brand | Expert Electronics |
|---|---|
| Model | SunSDR2 DX |
| Category | Transceiver |
| Language | English |
To Next Page
