FAAC B680H - Electronic Installation; Board E680 S Overview

B680H 23 732719 - Rev.E
Translation of the original instructions
ENGLISH
4. ELECTRONIC INSTALLATION
4.1 BOARD E680S
 2 E680S board technical data
Max power 240 W
Accessories output voltage 24 V
"
Max. accessories load
including BUS 2easy accessories
800 mA
Max. BUS 2easy accessories load 500 mA
Max. flashing light load 24 V
"
4.8 W
Ambient operating temperature -20 °C to +65 °C
COMPONENTS
See figure 23
BOARD:
J1 Inputs and accessories voltage connector
J2 Outputs connector
J3 Indicator light connector
J4 Detection loops connector
J5 Motor connector
J6 BUS 2easy connector
J10 Connector for Minidec / RP / Decoder radio board
J11 Breakthrough sensor connector
J12 Emergency battery connector
J13 DC power supply connector
J14 USB connector
J16 Beam lights connector
J17 Beam movement encoder connector
J18 Integrated traffic light connector
DISP1 Signalling / programming display
+ – F Programming buttons
CAL1 CAL2 LOOP1 / LOOP2 calibration button
M1 M1A M2 Connectors for Simply Connect board
DL1 BUS 2easy device status
DL2 Bus status
DL3 LOOP1 status
DL4 LOOP2 status
DL5 Board faulty signal
DL6 Not used
DL7 Encoder Status
DL8 Not used
DL9 Board powered
DL10 Input status LED OPEN
DL11 Input status LED CLOSE
DL12 Input status LED FSW
DL13 Input status LED STOP
DL14 Input status LED EMR
DL15 Beam released signal
DL16 Battery operation signal
DL17 Radio channel 1 activity
DL18 Radio channel 2 activity