B680H 1 732719 - Rev.E
Translation of the original instructions
ENGLISH
CONTENTS
1. INTRODUCTION TO THIS INSTRUCTIONS MANUAL .... 3
1.1 Safety warnings for the installer ........................ 3
1.2 Meaning of the symbols used .......................... 3
2. B680H ................................................. 4
2.1 Unpacking and handling ............................... 4
Close the vent hole when handling ................... 4
2.2 Product identification.................................. 5
Markings on the product ............................. 5
2.3 Intended use .......................................... 6
2.4 Limitations of use ..................................... 6
2.5 Unauthorised use ..................................... 7
2.6 Emergency use ........................................ 7
2.7 Technical specifications B680H ......................... 8
Features - electronic board E680S: .................... 9
2.8 Component identification ............................. 10
Barrier body ........................................ 10
Installation components (supplied separately) ....... 11
2.9 Dimensions .......................................... 12
2.10 Manual operation ................................... 13
Releasing the barrier ................................ 13
Restoring operation ................................ 13
2.11 Example system..................................... 14
3. MECHANICAL INSTALLATION ......................... 15
3.1 Installing the foundation plate ........................ 15
3.2 Installing the barrier body ............................ 16
3.3 Fitting the spring ..................................... 17
Preparing the balancer .............................. 17
Inserting the spring and fastening the pistons ........ 18
3.4 Install the bracket and beam .......................... 19
Installing modular beams (optional) ................. 20
Completing the beam installation ................... 20
Installing accessories on the beam ................... 21
3.5 Balancing the beam .................................. 21
3.6 Limit switch adjustment .............................. 22
4. ELECTRONIC INSTALLATION .......................... 23
4.1 Board E680S ......................................... 23
Components ....................................... 23
4.2 Connections ......................................... 25
Control devices (J1) ................................. 25
Outputs (J2) ........................................ 25
External flashing light 24 V
"
(J3) ................. 25
Loop (J4) ........................................... 26
Motor (J5) .......................................... 26
BUS 2easy (J6) devices .............................. 26
Radio receiver/decoder board (J10) .................. 26
Beam breakthrough sensor (J11) ..................... 26
Battery XBAT 24 (J12) ............................... 27
Power supply 36 V
"
(J13) .......................... 27
Beam lights 36 V
"
(J16) ........................... 27
Encoder (J17) ....................................... 27
Integrated flashing traffic light (J18) ................. 27
Simply Connect (m1 - m1A - m2) ..................... 27
5. START-UP ............................................ 28
5.1 Programming the board .............................. 29
5.2 Parameter
cF ....................................... 39
5.3 Operating logics ...................................... 40
Automatic logics .................................... 40
Semi-automatic logics .............................. 41
Dead man logic - maintained ........................ 41
Custom Logic ....................................... 41
5.4 Check the direction of movement ...................... 42
5.5 Set-up ............................................... 43
6. PUTTING INTO SERVICE .............................. 44
6.1 Final checks .......................................... 44
6.2 Installing the cabinet ................................. 44
6.3 Closing the door ...................................... 45
6.4 Final operations ...................................... 45
7. ACCESSORIES ......................................... 46
7.1 BUS 2easy devices .................................... 47
Connecting a BUS 2easy device. ...................... 47
Registering BUS 2easy devices ....................... 48
Checking the BUS 2easy status LEDs.................. 48
Verifying BUS 2easy devices ......................... 48
7.2 Relay photocells ...................................... 49
7.3 Installing photocells on the barrier .................... 50
7.4 Simply Connect ...................................... 51
7.5 Integrated traffic light ................................ 51
7.6 External flashing light 24V
"
......................... 52
7.7 Beam light kit ........................................ 52
7.8 XBAT 24 emergency battery .......................... 52
7.9 RP radio module ..................................... 52
7.10 Pivoting Beam kit ................................... 52
7.11 Hedge .............................................. 52
7.12 Fork ................................................ 52
7.13 Beam joint kit ....................................... 53
7.14 Foot ................................................ 53
7.15 Anti-panic unit ...................................... 53
7.16 Anti-vandal unit .................................... 53
7.17 Lock with personalised key........................... 53
To Next Page
Loading...
