FAAC B680H - Unpacking and Handling; Close the Vent Hole When Handling

1
2
B680H 4 732719 - Rev.E
1
3
2
Translation of the original instructions
ENGLISH
2. B680H
2.1 UNPACKING AND HANDLING
1. Carefully set the package down on the ground.
2. Cut the packaging in order to open it completely
and remove all the packaging material.
3. Stand the barrier on the base.
4. Check that all components are present and intact
(1):
1 B680H barrier body
2 Installation accessories
3 Hazard warning sticker
CLOSE THE VENT HOLE WHEN HANDLING
The B680H is supplied with the vent hole closed with
a screw and washer. When handling the barrier, the
vent hole should be closed to prevent oil leaks (2).