7
B680H 9 732719 - Rev.E
Translation of the original instructions
ENGLISH
1 Technical data
B680H
Power supply
voltage
100-240 V~ 50/60 Hz
Electric motor Brushless 36 V
"
Max power 240 W
Speed 60°/s (S beam 2.3 m) - 15°/s (L beam 8.3 m)
Use frequency Continuous use
Ambient operating
temperature
-15 °C to +65 °C
Protection rating IP 56
Dimensions
(L x D x H)
469 x 279 x 1100 mm
Weight 70 kg
FAAC foundation plate
Dimensions (L x H) 470 x 280 mm
FAAC beam Beam length
Maximum length S beam 5.3 m
Maximum length L beam 8.3 m
FEATURES ELECTRONIC BOARD E680S:
■ Switching power supply
The switching power supply reduces power consump-
tion in stand-by mode, keeps the output voltage stable
even in the event of fluctuations in the mains supply
and works over a wide range of input voltages.
■ Display with programming buttons
There are three menus for programming from the
board, via the display and dedicated buttons: BASIC,
ADVANCED and EXPERT. The board is also designed
to be programmed remotely via Simply Connect.
■ Simply Connect
A cloud platform that allows remote communication
with the automation, with specific modes for the in-
staller or user. The Simply Connect system requires
a connectivity module (accessory) to plug in to the
electronic board, which is chosen according to the
technology to be used (Wi-Fi, LAN, GSM).
■ BUS 2easy connection
FAAC BUS 2easy devices (photocells and control de-
vices) can be connected.
To Next Page
Loading...
