B680H 33 732719 - Rev.E
Translation of the original instructions
ENGLISH
Advanced function Default
o7
INTEGRATED flashing light OPERATING MODE
01 traffic light control (steady green with bar-
rier in paused/open, red flashing during movement,
steady red when barrier closed)
02 flashing light (flashing red during move-
ment, off in all other states)
01
AS
MAINTENANCE REQUEST - CYCLE COUNTER
Enables/disables the maintenance alert when the
programmed number of cycles has been reached
as specified in the following functions
Y enabled
no not enabled
no
nc
THOUSANDS OF CYCLES
Displays the thousands of cycles that have been
performed.
00…99 (thousands of cycles - programmable if
AS = Y)
00
nC
CYCLE PROGRAMMING IN HUNDREDS OF THOU-
SANDS OF CYCLES
Displays the thousands of cycles that have been
performed.
00…99 (thousands of cycles - programmable if
AS = Y)
i
The value displayed is updated as the
cycles progress, interacting with the
value of nc (a decrease of 1 in nC
corresponds to a decrease of 99 in nc).
00
St
AUTOMATION SYSTEM STATUS:
See St in the Basic programming
Y
To Next Page
Loading...
