Fagor CNC 8055i FL EN - Page 169

Installation manual
CNC 8055
CNC 8055i
MACHINE PARAMETERS
6.
SOFT: V02.2X
·169·
General machine parameters
Orthogonal or spherical spindle.
Swinging spindle.
The swinging spindle head "XFORM=2" does not have a secondary or "dragged" axis but parameter
"XFORM1" is defined like in the case of the 45º and spherical one.
XFORM2 (P95)
It defines the turning direction of the rotary axes.
XFORM = 2
XFORM1 = 0
XFORM = 2
XFORM1 = 1
XFORM = 2
XFORM1 = 2
XFORM = 2
XFORM1 = 3
XFORM = 2
XFORM1 = 0
Value Meaning
0 The one indicated by the DIN 66217 standard (see figure).
1 It changes the turning direction of the main axis.
2 It changes the turning direction of the secondary axis.
3 It changes the turning direction of both axes (main and secondary).
Default value: 0