·306·
Installation manual
CNC 8055
CNC 8055i
7.
CONCEPTS
SOFT: V02.2X
Jog
7.2 Jog
7.2.1 Relationship between the axes and the JOG keys
The mill model CNC has 5 pairs of JOG keys and the lathe model has 4 pairs of keys to jog the axes
of the machine.
The X, Y and Z axes always use their own denomination; the "C" axis of a lathe model uses the [3+]
and [3-] keys and the rest of the axes depend on the chosen name.
The logical order is: X Y Z U V W A B C.
Key configuration examples
A milling machine has the X Y Z U B axes.
A laser machine has the X Y A B axes.
A punch press has the X Y C axes.
A lathe has the X Z U A axes.
A lathe has the X Z U C axes.
The X axis keys are: [X+] [X-]
The Y axis keys are: [Y+] [Y-]
The Z axis keys are: [Z+] [Z-]
The U axis keys are: [4+] [4-]
The B axis keys are: [5+] [5-]
The X axis keys are: [X+] [X-]
The Y axis keys are: [Y+] [Y-]
The A axis keys are: [Z+] [Z-]
The B axis keys are: [4+] [4-]
The X axis keys are: [X+] [X-]
The Y axis keys are: [Y+] [Y-]
The C axis keys are: [Z+] [Z-]
The X axis keys are: [X+] [X-]
The Z axis keys are: [Z+] [Z-]
The U axis keys are: [3+] [3-]
The A axis keys are: [4+] [4-]
The X axis keys are: [X+] [X-]
The Z axis keys are: [Z+] [Z-]
The U axis keys are: [4+] [4-]
The C axis keys are: [3+] [3-]
To Next Page
Loading...
