Installation manual
CNC 8055
CNC 8055i
MACHINE PARAMETERS
6.
SOFT: V02.2X
·175·
General machine parameters
Definition of the kinematics of the angular spindle (XFORM = 4)
XFORM1 (P94)
Sets the spindle axes and their order.
The rotary axes are called A, B or C depending on whether the rotation axis is X, Y or Z respectively.
The turning direction of the axes may be changed with parameter "XFORM2".
When having a rotary axis "XFORM=4", parameter "XFORM1" indicates which is the main axis and
which one is the secondary or "dragged" axis.
Value Meaning
0 A is the main axis and B is the secondary axis.
1 A is the main axis and C is the secondary axis.
2 B is the main axis and A is the secondary axis.
3 B is the main axis and C is the secondary axis.
Default value: 0
XFORM=4
XFORM1=0
XFORM=4
XFORM1=1
XFORM=4
XFORM1=2
XFORM=4
XFORM1=3
To Next Page
Loading...
