Installation manual
CNC 8055
CNC 8055i
MACHINE PARAMETERS
6.
SOFT: V02.2X
·255·
Spindle parameters
ACCTIME4 (P59).
Parameter ACCTIME4 is set like ACCTIME3.
SECACESP (P60)
Parameter SECACESP (P60) indicates at what speed the acceleration change takes place. If
P60=0, it always applies ACCTIME3.
SYNCPOLA (P61)
It is defined at the second spindle. It indicates whether the spindles being synchronized are facing
each other or not (opposite turning directions in M3 or M4) for the CNC to take it into consideration
when synchronizing them.
Possible values
Integers between 0 and 65535 ms.
Default value: 8000.
Possible values
Integers between 0 and 65535 rpm.
Default value: 700.
Example:
Being the maximum speed for the selected gear MAXGEAR = 6000 rpm.
Maximum synch speed: 5000 rpm.
SYNMAXSP (P63) = 5000
Acceleration changing speed: 3500 rpm.
SECACESP (P60) = 3500
ACCTIME3(P55) = 6000 x 4 / 3500 = 6857 ms.
ACCTIME4(P59) = 6000 x 6 / 1500 = 24000 ms.
Value Meaning
EZ They are NOT facing each other; they both turn in the same direction.
YES They are facing each other; they turn in opposite directions.
Default value: EZ
To Next Page
Loading...
