·172·
Installation manual
CNC 8060
CNC 8065
2.
MACHINE PARAMETERS.
(REF: 1402)
Machine parameters for JOG mode.
Handwheel associated with the rest of the axes (Z + A).
Setting the jog keys.
On a machine with the X, Y, U, V axes defined as AXISNAME 1, 2, 3, 4, we would like to
jog the X and Y axes with the keys that have the same names, the U axis with the keys for
the 4th axis and the V axis with those of the 5th axis.
Example 1: JOG-PANEL keyboard.
Example 2: JOG-PANEL keyboard.
Machine parameter. Value. Meaning.
COUNTERTYPE Remote. Handwheel connected to the remote modules.
COUNTERID 1 Feedback input X1.
MPGAXIS Handwheel associated with the rest of the axes.
Z- MPGRESOL 1 0.001 Z axis. Resolution 0.001
Z- MPGRESOL 10 0.01 Z axis. Resolution 0.01
Z- MPGRESOL 100 0.1 Z axis. Resolution 0.1
A- MPGRESOL 1 0.01 A axis. Resolution 0.01
A- MPGRESOL 10 0.1 A axis. Resolution 0.1
A- MPGRESOL 100 1 A axis. Resolution 1
Jog keyboard. JOGKEYDEF Key. Value.
1[X+]1+
2[Y+]2+
3[4+]3+
4[X-]1-
5[Y-]2-
6[4-]3-
7[5+]4+
8[R]R
9[5-]4-
10 - 15 - - -
Jog keyboard. JOGKEYDEF Key. Value.
1[X]1
2[Y]2
3[+]+
4[4]3
5[5]4
6[-]-
7[R]R
8 - 15 - - -
To Next Page
Loading...
