Fagor CNC 8060 - Machine Parameters for the Magazine

Installation manual
CNC 8060
CNC 8065
MACHINE PARAMETERS.
2.
(REF: 1402)
·203·
Machine parameters for the magazine.
2.10 Machine parameters for the magazine.
TOOL MAGAZINE CONFIGURATION.
NTOOLMZ
Number of tool magazines.
Possible values: From 0 to 4.
Default value: 1.
Associated variable: (V.)TM.NTOOLMZ
Number of system's tool magazines.
Although each channel has its own tool management, the tool magazines are not associated
with any particular channel. They are not associated with any particular spindle either.
GROUND
Ground tools are permitted (manual load).
Possible values: Yes / No.
Default value: No.
Associated variable: (V.)TM.MZGROUND[mz]
They are the ones not located in the magazine. When programming them, the CNC requests
them to be inserted in the spindle.
MAGAZINE n
Tool magazine table.
This parameter shows the tables to define the magazine data. Each table shows the following
machine parameters to configure it.
MAGAZINE DATA.
STORAGE
Parameters related to magazine.
This parameter shows or hides the magazine data. Each table shows the following machine
parameters to configure it.
SIZE
Size of the magazine (number of pockets).
Possible values: From 0 to 1000.
Default value: 20.
Associated variable: (V.)TM.MZSIZE[mz]
Parameter included in the MAGAZINE // STORAGE table.
This parameter indicates the capacity of the magazine without including the ground tools.
MAGAZINE n
STORAGE Parameters related to storage.
MANAGEMENT Magazine management related parameters.
MAGAZINE n
SIZE Size of the tool magazine (number of pockets).
RANDOM Random magazine.