Fagor CNC 8060 - Remote Module RCS-S

·522·
Installation manual
CNC 8060
CNC 8065
9.
CONCEPTS.
(REF: 1402)
Remote module RCS-S.
9.14 Remote module RCS-S.
The "RCS-S" counter may be used to get extra feedback (counter) inputs and analog outputs
(remote I/O). These modules are connected to the central unit via Sercos bus and they are
just another bus within the bus. Each module offers the following elements.
Type of input/output Amount.
Feedback inputs. 4
Analog outputs. 4
Connector ·E21A·.
Feedback input.
Connector ·E21B·.
Feedback input.
Connector ·E21C·.
Feedback input.
Connector ·E21D·.
Feedback input.
Connector ·I37A·.
2 general purpose analog outputs.
Connector ·I37B·.
2 general purpose analog outputs.