Installation manual
CNC 8060
CNC 8065
TOOL AND MAGAZINE MANAGEMENT.
7.
(REF: 1402)
·343·
Types of tool magazine.
7.1 Types of tool magazine.
Tool magazines may be divided into 4 large groups:
"Random" or "Non-Random" magazine
Depending on how the tools are stored in the magazine during a tool change, the magazine
may be either random or non-random. In a random magazine, the tool may occupy any
position whereas in a non-random magazine, the tools must always occupy the same
position.
Turret type.
Synchronous magazine without changer arm.
Synchronous magazine with changer arm (1 or 2
holders). The arm cannot move while machining the
part.
Asynchronous magazine. Tool changer arm of
independent movements that may be moved while
machining.
To Next Page
Loading...
