Fagor CNC 8060 - Variables Related to the Loop of the Axis or of the Tandem Spindle

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·767·
Variables related to the loop of the axis or of the tandem spindle.
10.37 Variables related to the loop of the axis or of the tandem spindle.
(V.)[ch].A.TPIIN.xn
(V.)[ch].A.TPIIN.sn
(V.)[ch].SP.TPIIN.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Input of the PI of the master axis of the tandem (in rpm).
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].A.TPIOUT.xn
(V.)[ch].A.TPIOUT.sn
(V.)[ch].SP.TPIOUT.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Output of the PI of the master axis of the tandem (in rpm).
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].A.TFILTOUT.xn
(V.)[ch].A.TFILTOUT.sn
(V.)[ch].SP.TFILTOUT.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Output of the pre-load filter of the tandem.
Syntax.
·ch· Channel number.
V.A.TPIIN.Z Z axis.
V.A.TPIIN.S Spindle S.
V.SP.TPIIN.S Spindle S.
V.SP.TPIIN Master spindle.
V.A.TPIIN.4 Axis or spindle with logic number ·4·.
V.[2].A.TPIIN.1 Axis with index ·1· in the channel ·2·.
V.SP.TPIIN.2 Spindle with index ·2· in the system.
V.[2].SP.TPIIN.1 Spindle with index ·1· in the channel ·2·.
V.A.TPIOUT.Z Z axis.
V.A.TPIOUT.S Spindle S.
V.SP.TPIOUT.S Spindle S.
V.SP.TPIOUT Master spindle.
V.A.TPIOUT.4 Axis or spindle with logic number ·4·.
V.[2].A.TPIOUT.1 Axis with index ·1· in the channel ·2·.
V.SP.TPIOUT.2 Spindle with index ·2· in the system.
V.[2].SP.TPIOUT.1 Spindle with index ·1· in the channel ·2·.