Fagor CNC 8060 - Variables Related to the Active Tool and to the Next One

·810·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to the active tool and to the next one.
10.49 Variables related to the active tool and to the next one.
Variables related to the active tool are always read synchronously. The writing of these
variables is always asynchronous, be it for the active tool or not.
TOOL AND ACTIVE OFFSET.
(V.)[ch].TM.TOOL
Variable that can only be read from the program, PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
Number of the active tool.
Syntax.
·ch· Channel number.
(V.)[ch].TM.TOD
Variable that can only be read from the program, PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
Number of the active tool offset.
Syntax.
·ch· Channel number.
NEXT TOOL AND TOOL OFFSET.
(V.)[ch].TM.NXTOOL
Variable that can only be read from the program, PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
Number of the next tool.
The "next tool" is the one already selected but waiting to be activated by executing an M06.
Syntax.
·ch· Channel number.
Remarks.
Although the variable has writing permission, the value of 0 (zero) cannot be written.
(V.)[ch].TM.NXTOD
Variable that can only be read from the program, PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
Number of the next tool offset.
Syntax.
·ch· Channel number.
V.[2].TM.TOOL Channel ·2·. Active tool.
V.[2].TM.TOD Channel ·2·. Active tool offset.
V.[2].TM.NXTOOL Channel ·2·. Next tool.
V.[2].TM.NXTOD Channel ·2·. Next tool offset.