Fagor CNC 8060 - Configuration Examples

·436·
Installation manual
CNC 8060
CNC 8065
9.
CONCEPTS.
(REF: 1402)
Configure the name and number of axes and spindles.
9.1.3 Configuration examples.
Here are various machine configurations. Each one indicates the logic number and index
of each axis and spindle in the channel. Each example also shows the work plane associated
with functions G17, G18 and G19.
The lathe examples indicate the value of machine parameter GEOCONFIG because the
behavior of the functions related to the work planes changes depending on this parameter.
Example list. Page.
Milling machine with 1 channel, 3 axes and 1 spindle. 437
Milling machine with 1 channel, 5 axes (2 free) and 1 spindle. 438
Milling machine with 3 channels, 9 axes and 2 spindles.
Channel 1: 3 axes and 1 spindle.
Channel 2: 4 axes and 1 spindle.
Channel 3: 2 axes and no spindle.
439
Lathe with 1 channel, 2 axes and 1 spindle. Configuration of "plane" type axes. 440
Lathe with 1 channel, 3 axes and 1 spindle. Configuration of "plane" type axes. 441
Lathe with 1 channel, 3 axes and 1 spindle. Configuration of trihedron type axes. 442
Lathe with 1 channel, 3 axes (1 free) and 1 spindle. Configuration of "plane" type axes. 443
Lathe with 2 channels, 4 axes and 2 spindles.
Channel 1: 2 axes and 1 spindle. Configuration of "plane" type axes.
Channel 2: 2 axes and 1 spindle. Configuration of "plane" type axes.
444
Lathe with 3 channels, 6 axes and 2 spindles.
Channel 1: 2 axes and 1 spindle. Configuration of "plane" type axes.
Channel 2: 2 axes and 1 spindle. Configuration of "plane" type axes.
Channel 3: 2 axes and no spindle.
445