·440·
Installation manual
CNC 8060
CNC 8065
9.
CONCEPTS.
(REF: 1402)
Configure the name and number of axes and spindles.
Configuration of the axes and spindles of channel ·3·.
Plane selection in channels ·1· and ·2·.
LATHE WITH 1 CHANNEL, 2 AXES AND 1 SPINDLE.
CONFIGURATION OF "PLANE" TYPE AXES.
The axes and spindles are distributed as follows.
General configuration of the channels, axes and spindles.
Configuration of the axes and spindles of the system.
Configuration of the axes and spindles of channel ·1·.
Plane selection in channel ·1·.
With this configuration, the work plane is always G18 and will be formed by the first two axes
defined in the channel. If the X (firs axis of the channel) and Z (second axis of the channel)
have been defined, the work plane will be the ZX (Z as abscissa and X as ordinate). Functions
G17 and G19 are not valid. Since there are only two axes, function G20 makes no sense.
CHAXISNAME Value. Index in the channel. Logic order.
CHAXISNAME 1 U1 Axis with index ·1·. Logic number ·9·.
CHAXISNAME 2 U Axis with index ·2·. Logic number ·8·.
Function. Channel ·1·.
Selected plane.
Channel ·2·.
Selected plane.
G17 X-Y plane.
Perpendicular axis Z.
X1-Y1 plane.
Perpendicular axis Z1.
G18 Z-X plane.
Perpendicular axis Y.
Z1-X1 plane.
Perpendicular axis Y1.
G19 Y-Z plane.
Perpendicular axis X.
Y1-Z1 plane.
Perpendicular axis X1.
G20 Any plane and/or longitudinal axis. Any plane and/or longitudinal axis.
Channel ·1·. 2 axes (X Z) 1 spindle (S).
System Channel ·1·
NCHANNEL = 1 GEOCONFIG = Plane
NAXIS = 2 CHNAXIS = 2
NSPDL = 1 CHNSPDL = 1
IPLANE = G18
AXISNAME Value Logic order. Index in the system.
AXISNAME 1 X Logic number ·1·.
AXISNAME 2 Z Logic number ·2·.
SPDLNAME 1 S Logic number ·3·. Spindle with index ·1·.
CHAXISNAME Value Index in the channel. Logic order.
CHAXISNAME 1 X Axis with index ·1·. Logic number ·1·.
CHAXISNAME 2 Z Axis with index ·2·. Logic number ·2·.
CHSPDLNAME Value Index in the channel. Logic order.
CHSPDLNAME 1 S Spindle with index ·1·. Logic number ·3·.
To Next Page
Loading...
