Fagor CNC 8060 - Configure the Number of Axes and Spindles of the System

·434·
Installation manual
CNC 8060
CNC 8065
9.
CONCEPTS.
(REF: 1402)
Configure the name and number of axes and spindles.
9.1.1 Configure the number of axes and spindles of the system.
The axes and spindles of the system are configured using machine parameters NAXIS,
AXISNAME, NSPDL and SPDLNAME. The order the axes and spindles are defined in
parameters AXISNAME and SPDLNAME determines their logic number.
Logic number of the axes and spindles.
As with the name, the logic number permits identifying the axis or spindle in PLC variables,
marks, etc.
The logic number of the axes and spindles is determined by the order in which they have
been defined in machine parameters AXISNAME and SPDLNAME. The first axis of the
AXISNAME table will be logic axis ·1· and so on. The logic numbering of the spindles
continues from the last logic axis; hence, in a 3-axis system, the first spindle of the
SPDLNAME table will be logic spindle ·4· and so on.
Index of the spindles in the system.
As with the name, the index may be used to identify the spindle in the variables.
The index of a spindle in the system is determined by the order in which it has been defined
in machine parameter SPDLNAME. The index of the first spindle of the SPDLNAME table
will be ·1· and so on.
Parameter. Meaning.
NAXIS Number of axes of the system.
AXISNAME List of axes of the system.
NSPDL Number of spindles of the system
SPDLNAME List of spindles of the system.
AXISNAME SPDLNAME Logic order.
AXISNAME 1 Logic number ·1·.
AXISNAME 2 Logic number ·2·.
AXISNAME 3 Logic number ·3·.
SPDLNAME 1 Logic number ·4·.
SPDLNAME 2 Logic number ·5·.
AXISNAME
SPDLNAME
Logic order. Index in the system.
AXISNAME 1 Logic number ·1·.
AXISNAME 2 Logic number ·2·.
AXISNAME 3 Logic number ·3·.
SPDLNAME 1 Logic number ·4·. Spindle with index ·1·.
SPDLNAME 2 Logic number ·5·. Spindle with index ·2·.