Fagor CNC 8060 - Detailed Description of the Operations of the Magazine

·356·
Installation manual
CNC 8060
CNC 8065
7.
TOOL AND MAGAZINE MANAGEMENT.
(REF: 1402)
Magazine-less system.
7.6.2 Detailed description of the operations of the magazine.
Here is a sample of a detailed description of the valid operations for this magazine. In a
system without magazines, the TAKEPOS, LEAVEPOS, NEXTPOS and MZID signals are
not involved.
TMOPERATION = 3
Insert a ground tool in the spindle.
The sequence of this operation is the following.
1 When the operation is completed, activate the mark: GRTOSPDL.
TMOPERATION = 4
Leave the spindle tool on the ground.
The sequence of this operation is the following.
1 When the operation is completed, activate the mark: SPDLTOGR.
TMOPERATION = 8
Leave the spindle tool on the ground and take a tool from ground.
The sequence of this operation is the following.
1 Leave the tool of the spindle on the ground and activate the mark SPDLTOGR.
2 Leave the ground tool in the spindle and activate the mark GRTOSPDL.