·498·
Installation manual
CNC 8060
CNC 8065
9.
CONCEPTS.
(REF: 1402)
Calculation of the kinematics dimensions.
9.10 Calculation of the kinematics dimensions.
The OEM may set up to 6 different kinematics for the same machine. The CNC offers a
number of pre-defined kinematics that may be easily configured by machine parameters.
Besides these kinematics, the OEM can integrate 6 additional kinematics.
The dimensions to be set by parameter depend on the type of kinematics, set in parameter
TYPE. The following sections show, as examples, the methods to calculate the dimensions
of a kinematics with the help of a probe or a dial indicator.
To Next Page
Loading...
