Fagor CNC 8060 - Keystroke Consulting Signals

·310·
Installation manual
CNC 8060
CNC 8065
6.
LOGIC CNC INPUTS AND OUTPUTS.
(REF: 1402)
Keystroke consulting signals.
6.6 Keystroke consulting signals.
KEYBD1 / KEYBD2 / KEYBD3
These registers are a copy of the map of the keys pressed on the last keyboard used. These
registers indicate which key has been pressed (bit=1). If there is only one keyboard, these
registers coincide with KEYBD1_1 to KEYBD3_1. When there are several keyboards, the
contents of these registers are not always the same as KEYBD1_1 to KEYBD3_1; therefore,
they may be used indistinctively.
KEYBD1_1 / KEYBD2_1 / KEYBD3_1
··
KEYBD1_8 / KEYBD2_8 / KEYBD3_8
These registers indicate (bit=1) which key has been pressed on each operator panel.
Registers KEYBD1_1 to KEYBD3_1 correspond to the first jog panel, KEYBD1_2 to
KEYBD3_2 to the second one and so on.
Registers KEYBD1 / KEYBD1_1 to KEYBD1_8. User keys.
Bit Jog Panel LCD-10K
0 User key 1 User key 1
1 User key 2 User key 2
2 User key 3 User key 3
3 User key 4 User key 4
4 User key 5 User key 5
5 User key 6 User key 6
6User key 7 - - -
7User key 8 - - -
8User key 9 - - -
9 User key 10 - - -
10 User key 11 - - -
11 User key 12 - - -
12 User key 13 - - -
13 User key 14 - - -
14 User key 15 - - -
15 User key 16 - - -
1 16
J
O
G
K
EY
S
12
34
56
J
O
G
K
E
Y
S