Fagor CNC 8060 - PLC Modifiable Logic Signals; Axes and Spindles

·722·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
PLC modifiable logic signals; axes and spindles.
10.21 PLC modifiable logic signals; axes and spindles.
(V.)PLC.LIMITPOSxn
(V.)PLC.LIMITPOSsn
Variable that can be read and written from the interface and read from the program and from the PLC.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
The PLC must turn this mark on to indicate that the axis or the spindle has exceeded the
positive travel limit.
Syntax.
·xn· Name or logic number of the axis.
·sn· Name or logic number of the spindle.
(V.)PLC.LIMITNEGxn
(V.)PLC.LIMITNEGsn
Variable that can be read and written from the interface and read from the program and from the PLC.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
The PLC must turn this mark on to indicate that the axis or the spindle has exceeded the
negative travel limit.
Syntax.
·xn· Name or logic number of the axis.
·sn· Name or logic number of the spindle.
(V.)PLC.DECELxn
(V.)PLC.DECELsn
Variable that can be read and written from the interface and read from the program and from the PLC.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
The PLC must turn this mark on to indicate that the home switch is pressed.
Syntax.
·xn· Name or logic number of the axis.
·sn· Name or logic number of the spindle.
V.PLC.LIMITPOSX X axis.
V.PLC.LIMITPOSS Spindle S.
V.PLC.LIMITPOS3 Axis or spindle with logic number ·3·.
V.PLC.LIMITNEGX X axis.
V.PLC.LIMITNEGS Spindle S.
V.PLC.LIMITNEG3 Axis or spindle with logic number ·3·.
V.PLC.DECELX X axis.
V.PLC.DECELS Spindle S.
V.PLC.DECEL3 Axis or spindle with logic number ·3·.