Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·811·
Variables related to the active tool and to the next one.
STATUS OF THE ACTIVE TOOL.
(V.)[ch].TM.TSTATUS
Variable that can only be read from the program, PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
Active tool. Tool status.
Syntax.
·ch· Channel number.
Values of the variable.
This variable returns one of the following values.
FAMILY OF THE ACTIVE TOOL.
(V.)[ch].TM.TLFF
Variable that can only be read from the program, PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
Active tool. Family code.
Syntax.
·ch· Channel number.
ACTIVE TOOL MONITORING.
(V.)[ch].TM.TOMON[ofd]
Variable that can only be read from the program, PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
[odf] offset of the active tool. Type of tool life monitoring.
Syntax.
[odf] Tool offset; if missing, the active tool offset.
·ch· Channel number.
Values of the variable.
This variable returns one of the following values.
V.[2].TM.TSTATUS Channel ·2·. Active tool.
Value. Meaning.
0 Tool available.
1 Tool available.
2 Tool worn out.
V.[2].TM.TLFF Channel ·2·.
V.[2].TM.TOMON Channel ·2·. Active tool offset.
V.[2].TM.TOMON[3] Channel ·2·. Tool offset ·3·.
Value. Meaning.
0 Without tool life monitoring.
1 Tool life monitoring; machining time.
2 Tool life monitoring; number of operations.
To Next Page
Loading...
