Fagor CNC 8060 - Page 184

·184·
Installation manual
CNC 8060
CNC 8065
2.
MACHINE PARAMETERS.
(REF: 1402)
Machine parameters for kinetics.
TDATA11
Turning direction of the secondary rotary axis.
Possible values: 0 (by the standard DIN 66217) / 1 / opposite to the standard DIN 66217).
Default value: 0.
The direction of the XYZ axes, according to the DIN 66217 standard is easy to remember
using the rule of the right hand. On rotary axes, the turning direction is established when
bending your fingers (closing your hand) around the associated linear axis while your thumb
is pointing in the positive direction of the linear axis.
TDATA12
Manual rotary axes or servo-controlled.
Possible values: 0 to 3.
Default value: 0.
This parameter indicates whether the rotary axes are manual or servo-controlled.
TDATA 13··TDATA15
Spindle position referred to the machine reference point.
TDATA12 Meaning.
0 The two axes are servo-controlled.
1 Main axis manual and secondary axis servo-controlled.
2 Main axis servo-controlled and secondary axis manual.
3 The two axes are manuals.
TDATA13 Distance between the main rotary axis and the reference point, along the X
axis.
TDATA14 Distance between the main rotary axis and the reference point, along the Y
axis.
TDATA15 Distance between the main rotary axis and the reference point, along the Z
axis.