Installation manual
CNC 8060
CNC 8065
SOFTWARE INSTALLATION.
1.
(REF: 1402)
·33·
Software installation at the PC (simulator).
will move the corresponding folder from ..\CONFIGURATION to CNC8070 and will
rename it MTB.
• If the OEM has created the MTB folder manually, for example by copying it from a backup,
the system will not make any changes on power-up nor when modifying the validation
code.
Changing the language of the help files.
The help files are installed in English. The CD that comes with the product contains the help
files in different languages. You can change the help files installed by default with the ones
provided on the CD.
Locate the folder Help files inside the CD, select one of the available languages and copy
all the files to its CNC location. The help files installed at the CNC (or at the PC, if it is a
simulator) are located in the following folder.
The help files can only be in one language at a time at the CNC. The language of the help
files may be different from the one chosen for the interface.
8060 CNC
C:\FagorCnc\Fagor\MMC\Help
8065 CNC
C:\Cnc8070\Fagor\MMC\Help
To Next Page
Loading...
