·478·
Installation manual
CNC 8060
CNC 8065
9.
CONCEPTS.
(REF: 1402)
Software limits of the axes.
CNC behavior when an axis reaches the software limits.
When an axis reaches the software limits, the CNC interrupts the execution and shows the
pertinent error message. To take the axis to the work zone, access the JOG mode and move
the axis or spindle that overran the travel limit. The axis or spindle can only move in the
direction that places it within the limits.
The CNC offers the following variable to indicate that an axis has reached the software limits.
The PLC activates one of these marks to indicate to the CNC that the corresponding axis
or spindle has reached the positive or negative travel limit.
Variable. Meaning.
(V.)[ch].G.SOFTLIMIT Software limits reached.
PLC mark. Meaning.
LIMITPOS(axis) The axis has reached the upper software travel limit.
LIMITNEG(axis) The axis has reached the lower software travel limit.
To Next Page
Loading...
