·548·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to general machine parameters.
VOLUMETRIC COMPENSATION TABLES.
(V.)MPG.VCOMPAXIS1[tbl]
(V.)MPG.VCOMPAXIS2[tbl]
(V.)MPG.VCOMPAXIS3[tbl]
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Volumetric compensation table [tbl]. Axis to be compensated.
Syntax.
·tbl· Table number.
(V.)MPG.VCOMPFILE[tbl]
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Volumetric compensation table [tbl]. File containing volumetric compensation data.
Syntax.
·tbl· Table number.
EXECUTION TIMES.
(V.)MPG.MINAENDW
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Minimum duration of the AUXEND signal (in milliseconds).
(V.)MPG.REFTIME
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Estimated home searching time (in milliseconds).
(V.)MPG.HTIME
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Estimated time for an "H" function (in milliseconds).
(V.)MPG.DTIME
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Estimated time for an "D" function (in milliseconds).
V.MPG.COMPAXIS2[1] Second axis to be compensated in the first volumetric
compensation table.
V.MPG.VCOMPFILE[1] File for defining the first volumetric compensation.
V.MPG.MINAENDW
V.MPG.REFTIME
V.MPG.HTIME
V.MPG.DTIME
To Next Page
Loading...
