·552·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to general machine parameters.
Values of the variable.
This variable returns one of the following values.
SHARED PLC MEMORY.
(V.)MPG.PLCDATASIZE
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Size (in bytes) of the PLC's shared data area.
MANAGEMENT OF LOCAL I/O.
(V.)MPG.NLOCOUT
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Number of local digital outputs.
(V.)MPG.EXPSCHK
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Activate the 24 V monitoring at the local digital outputs.
Values of the variable.
This variable returns one of the following values.
SYNCHRONIZED SWITCHING.
(V.)MPG.SWTOUTPUT
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Local digital output associated with synchronized switching.
(V.)MPG.SWTDELAY
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Value. Meaning.
0 Low logic level (0 V).
1 High logic level (5 V / 24 V).
V.MPG.PLCDATASIZE
V.MPG.NLOCOUT
V.MPG.EXPSCHK
Value. Meaning.
0No.
1Yes.
V.MPG.SWTOUTPUT
To Next Page
Loading...
