Fagor CNC 8060 - Page 595

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·595·
Variables related to axis and spindle machine parameters.
Values of the variable.
This variable returns one of the following values.
(V.)[ch].MPA.DSYNCVELW.xn
(V.)[ch].SP.DSYNCVELW.sn
(V.)[ch].SP.DSYNCVELW.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Velocity synchronization window.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].MPA.DSYNCPOSW.xn
(V.)[ch].SP.DSYNCPOSW.sn
(V.)[ch].SP.DSYNCPOSW.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Position synchronization window.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
Value. Meaning.
0 Do not force the parameter set.
1 to 4 Parameter set.
V.MPA.DSYNCVELW.Z Z axis.
V.MPA.DSYNCVELW.S Spindle S.
V.SP.DSYNCVELW.S Spindle S.
V.SP.DSYNCVELW Master spindle.
V.MPA.DSYNCVELW.4 Axis or spindle with logic number ·4·.
V.[2].MPA.DSYNCVELW.1 Axis with index ·1· in the channel ·2·.
V.SP.DSYNCVELW.2 Spindle with index ·2· in the system.
V.[2].SP.DSYNCVELW.1 Spindle with index ·1· in the channel ·2·.
V.MPA.DSYNCPOSW.Z Z axis.
V.MPA.DSYNCPOSW.S Spindle S.
V.SP.DSYNCPOSW.S Spindle S.
V.SP.DSYNCPOSW Master spindle.
V.MPA.DSYNCPOSW.4 Axis or spindle with logic number ·4·.
V.[2].MPA.DSYNCPOSW.1 Axis with index ·1· in the channel ·2·.
V.SP.DSYNCPOSW.2 Spindle with index ·2· in the system.
V.[2].SP.DSYNCPOSW.1 Spindle with index ·1· in the channel ·2·.