Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·597·
Variables related to axis and spindle machine parameters.
OVERRIDE CHANGE WHILE THREADING.
(V.)[ch].MPA.THREADOVR.sn
(V.)[ch].SP.THREADOVR.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Maximum variation allowed for the override while threading.
Syntax.
·ch· Channel number.
·sn· Name, logic number or index of the spindle.
(V.)[ch].MPA.OVRFILTER.sn
(V.)[ch].SP.OVRFILTER.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Time to make the override change effective.
Syntax.
·ch· Channel number.
·sn· Name, logic number or index of the spindle.
RUNAWAY PROTECTION AND TENDENCY TEST.
(V.)[ch].MPA.TENDENCY.xn
(V.)[ch].SP.TENDENCY.sn
(V.)[ch].SP.TENDENCY.sn
Variable that can only be read from the program, PLC and interface.
Variable that may be modified during setup.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for analog drives.
The variable returns the execution value; reading it interrupts block preparation.
Channel [ch]. Activation of tendency test.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
V.MPA.THREADOVR.S Spindle S.
V.SP.THREADOVR.S Spindle S.
V.SP.THREADOVR Master spindle.
V.MPA.THREADOVR.4 Spindle with logic number ·4·.
V.SP.THREADOVR.2 Spindle with index ·2· in the system.
V.[2].SP.THREADOVR.1 Spindle with index ·1· in the channel ·2·.
V.MPA.OVRFILTER.S Spindle S.
V.SP.OVRFILTER.S Spindle S.
V.SP.OVRFILTER Master spindle.
V.MPA.OVRFILTER.4 Spindle with logic number ·4·.
V.SP.OVRFILTER.2 Spindle with index ·2· in the system.
V.[2].SP.OVRFILTER.1 Spindle with index ·1· in the channel ·2·.
To Next Page
Loading...
