Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·599·
Variables related to axis and spindle machine parameters.
·sn· Name, logic number or index of the spindle.
DWELL FOR DEAD AXES.
(V.)[ch].MPA.DWELL.xn
(V.)[ch].MPA.DWELL.sn
(V.)[ch].SP.DWELL.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Dwell for dead axes.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
PROGRAMMING IN RADIUS OR DIAMETERS.
(V.)[ch].MPA.DIAMPROG.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for linear axes.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Programming in diameters.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
V.MPA.PLCOINC.Z Z axis.
V.MPA.PLCOINC.S Spindle S.
V.SP.PLCOINC.S Spindle S.
V.SP.PLCOINC Master spindle.
V.MPA.PLCOINC.4 Axis or spindle with logic number ·4·.
V.[2].MPA.PLCOINC.1 Axis with index ·1· in the channel ·2·.
V.SP.PLCOINC.2 Spindle with index ·2· in the system.
V.[2].SP.PLCOINC.1 Spindle with index ·1· in the channel ·2·.
V.MPA.DWELL.Z Z axis.
V.MPA.DWELL.S Spindle S.
V.SP.DWELL.S Spindle S.
V.SP.DWELL Master spindle.
V.MPA.DWELL.4 Axis or spindle with logic number ·4·.
V.[2].MPA.DWELL.1 Axis with index ·1· in the channel ·2·.
V.SP.DWELL.2 Spindle with index ·2· in the system.
V.[2].SP.DWELL.1 Spindle with index ·1· in the channel ·2·.
V.MPA.DIAMPROG.Z Z axis.
V.MPA.DIAMPROG.4 Axis with logic number ·4·.
V.[2].MPA.DIAMPROG.1 Axis with index ·1· in the channel ·2·.
To Next Page
Loading...
