Fagor CNC 8060 - Page 614

·614·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to axis and spindle machine parameters.
Values of the variable.
This variable returns one of the following values.
(V.)[ch].MPA.FREQUENCY[nb].xn
(V.)[ch].MPA.FREQUENCY[nb].sn
(V.)[ch].SP.FREQUENCY[nb].sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Cutoff or center frequency
Syntax.
·ch· Channel number.
·nb· Filter number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].MPA.NORBWIDTH[nb].xn
(V.)[ch].MPA.NORBWIDTH[nb].sn
(V.)[ch].SP.NORBWIDTH[nb].sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Normal bandwidth.
Syntax.
·ch· Channel number.
·nb· Filter number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
Value. Meaning.
0 Low passing filter.
1 Anti-resonance Filter.
2 FAGOR low passing filter.
V.MPA .FREQUENCY[3].Z Z axis.
V.MPA .FREQUENCY[3].S Spindle S.
V.SP.FREQUENCY[3].S Spindle S.
V.SP.FREQUENCY[3] Master spindle.
V.MPA .FREQUENCY[3].4 Axis or spindle with logic number ·4·.
V.[2].MPA.FREQUENCY[3].1 Axis with index ·1· in the channel ·2·.
V.SP.FREQUENCY[3].2 Spindle with index ·2· in the system.
V.[2].SP.FREQUENCY[3].1 Spindle with index ·1· in the channel ·2·.
V.MPA .NORBWI DTH[3].Z Z axis.
V.MPA .NORBWI DTH[3].S Spindle S.
V.SP.NORBWIDTH[3].S Spindle S.
V.SP.NORBWIDTH[3] Master spindle.
V.MPA .NORBWI DTH[3].4 Axis or spindle with logic number ·4·.
V.[2].MPA.NORBWIDTH[3].1 Axis with index ·1· in the channel ·2·.
V.SP.NORBWIDTH[3].2 Spindle with index ·2· in the system.
V.[2].SP.NORBWIDTH[3].1 Spindle with index ·1· in the channel ·2·.