Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·663·
Variables related to the sets of machine parameters.
Values of the variable.
This variable returns one of the following values.
(V.)[ch].MPA.SSICLKFREQ[set].xn
(V.)[ch].MPA.SSICLKFREQ[set].sn
(V.)[ch].SP.SSICLKFREQ[set].sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for velocity-Sercos drives.
The variable returns the value of block preparation.
SSI communication frequency.
Syntax.
·ch· Channel number.
·set· Parameter set.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].MPA.SSIDATALENGTH[set].xn
(V.)[ch].MPA.SSIDATALENGTH[set].sn
(V.)[ch].SP.SSIDATALENGTH[set].sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for velocity-Sercos drives.
The variable returns the value of block preparation.
Number of bits of the SSI transmission that make up the position value (coordinate).
Syntax.
·ch· Channel number.
·set· Parameter set.
·xn· Name, logic number or index of the axis.
Value. Meaning.
0 Fagor LA
1 Fagor GA SA SVA
2 Fagor HA-27-D200
3 Fagor HA-23-D90 SA-23-D90 SA-23-D170
4 ABSIND (inductosyn LIN+ABS)
5 ABSIND (inductosyn ROT+ABS)
6 ABSIND (resolver)
7 ABSIND (inductosyn LIN)
8 ABSIND (inductosyn ROT)
9 G user
10 User
V.MPA.SSICLKFREQ[3].Z Z axis.
V.MPA.SSICLKFREQ[3].S Spindle S.
V.SP.SSICLKFREQ[3].S Spindle S.
V.SP.SSICLKFREQ[3] Master spindle.
V.MPA.SSICLKFREQ[3].4 Axis or spindle with logic number ·4·.
V.[2].MPA.SSICLKFREQ[3].1 Axis with index ·1· in the channel ·2·.
V.SP.SSICLKFREQ[3].2 Spindle with index ·2· in the system.
V.[2].SP.SSICLKFREQ[3].1 Spindle with index ·1· in the channel ·2·.
To Next Page
Loading...
