Fagor CNC 8060 - Page 665

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·665·
Variables related to the sets of machine parameters.
(V.)[ch].MPA.SSICRCTYPE[set].xn
(V.)[ch].MPA.SSICRCTYPE[set].sn
(V.)[ch].SP.SSICRCTYPE[set].sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for velocity-Sercos drives.
The variable returns the value of block preparation.
Tipo de CRC.
Syntax.
·ch· Channel number.
·set· Parameter set.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
Values of the variable.
This variable returns one of the following values.
(V.)[ch].MPA.SSICRCBITS[set].xn
(V.)[ch].MPA.SSICRCBITS[set].sn
(V.)[ch].SP.SSICRCBITS[set].sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for velocity-Sercos drives.
The variable returns the value of block preparation.
Number of CRC bits of the SSI transmission to check that the transmission is valid.
Syntax.
·ch· Channel number.
·set· Parameter set.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
V.MPA.SSICRCTYPE[3].Z Z axis.
V.MPA.SSICRCTYPE[3].S Spindle S.
V.SP.SSICRCTYPE[3].S Spindle S.
V.SP.SSICRCTYPE[3] Master spindle.
V.MPA.SSICRCTYPE[3].4 Axis or spindle with logic number ·4·.
V.[2].MPA.SSICRCTYPE[3].1 Axis with index ·1· in the channel ·2·.
V.SP.SSICRCTYPE[3].2 Spindle with index ·2· in the system.
V.[2].SP.SSICRCTYPE[3].1 Spindle with index ·1· in the channel ·2·.
Value. Meaning.
0 "Do not calculate CRC"
1 Fagor checksum.
2 INDUCTOSYN checksum.
V.MPA.SSICRCBITS[3].Z Z axis.
V.MPA.SSICRCBITS[3].S Spindle S.
V.SP.SSICRCBITS[3].S Spindle S.
V.SP.SSICRCBITS[3] Master spindle.
V.MPA.SSICRCBITS[3].4 Axis or spindle with logic number ·4·.
V.[2].MPA.SSICRCBITS[3].1 Axis with index ·1· in the channel ·2·.
V.SP.SSICRCBITS[3].2 Spindle with index ·2· in the system.
V.[2].SP.SSICRCBITS[3].1 Spindle with index ·1· in the channel ·2·.