·670·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to the sets of machine parameters.
Syntax.
·ch· Channel number.
·set· Parameter set.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
Values of the variable.
This variable returns one of the following values.
V.MPA .AXDELAY[3].Z Z axis.
V.MPA .AXDELAY[3].S Spindle S.
V.SP.AXDELAY[3].S Spindle S.
V.SP.AXDELAY[3] Master spindle.
V.MPA .AXDELAY[3].4 Axis or spindle with logic number ·4·.
V.[2].MPA.A XDELAY[3].1 Axis with index ·1· in the channel ·2·.
V.SP.AXDELAY[3].2 Spindle with index ·2· in the system.
V.[2].SP.AXDELAY[3].1 Spindle with index ·1· in the channel ·2·.
Value. Meaning.
Standard. For Fagor drives, that do not require any delay compensation.
0. The CNC does not apply delay compensation at the drive.
1 to 127. Delay cycles at the drive. The CNC automatically compensates for the delay
differences between the axes of the channel.
To Next Page
Loading...
