Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·689·
Variables associated with the status and resources of the PLC.
PLC CLOCKS.
(V.)PLC.TIMER
Variable that can be read and written via program, PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
Value of the freely available clock (in seconds).
This variable may be used to consult and/or modify the timing of the clock. Value in seconds.
Remarks.
The PLC "TIMER" is enabled or disabled with the PLC mark TIMERON. This clock is timing
when TIMERON=1.
(V.)PLC.CLKnb
Variable that can be read and written via program and interface.
The variable returns the execution value; reading it interrupts block preparation.
Status of PLC clock nb.
Values of the variable.
This variable returns one of the following values.
V.PLC.TIMER
V.PLC.CLK128
Value. Meaning.
0Clock off.
1 Clock on.
To Next Page
Loading...
