Fagor CNC 8060 - Page 725

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·725·
PLC modifiable logic signals; axes and spindles.
·sn· Name or logic number of the spindle.
(V.)PLC.LIMxnOFF
(V.)PLC.LIMsnOFF
Variable that can be read and written from the interface and read from the program and from the PLC.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
If the PLC turns this mark on, the CNC ignores the software travel limits.
Syntax.
·xn· Name or logic number of the axis.
·sn· Name or logic number of the spindle.
(V.)PLC.PARKEDxn
(V.)PLC.PARKEDsn
Variable that can be read and written from the interface and read from the program and from the PLC.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
The PLC turns this mark on when the axis or the spindle is parked.
Syntax.
·xn· Name or logic number of the axis.
·sn· Name or logic number of the spindle.
(V.)PLC.LUBRENAxn
(V.)PLC.LUBRENAsn
Variable that can be read and written from the interface and read from the program and from the PLC.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
The PLC turns this mark on to enable the lubrication of the axis or the spindle.
Syntax.
·xn· Name or logic number of the axis.
·sn· Name or logic number of the spindle.
V.PLC.DRENAX X axis.
V.PLC.DRENAS Spindle S.
V.PLC.DRENA3 Axis or spindle with logic number ·3·.
V.PLC.LIMXOFF X axis.
V.PLC.LIMSOFF Spindle S.
V.PLC.LIM3OFF Axis or spindle with logic number ·3·.
V.PLC.PARKEDX X axis.
V.PLC.PARKEDS Spindle S.
V.PLC.PARKED3 Axis or spindle with logic number ·3·.
V.PLC.LUBRENAX X axis.
V.PLC.LUBRENAS Spindle S.
V.PLC.LUBRENA3 Axis or spindle with logic number ·3·.