Installation manual
CNC 8060
CNC 8065
MACHINE PARAMETERS.
2.
(REF: 1402)
·77·
General machine parameters. Execution channels.
It is possible to change the configuration of the axes of a channel via part-program, (defining
a new configuration, adding or removing axes) using the instructions #SET AX, #FREE AX
and #CALL AX.
CHAXISNAME
List of the axes of the channel.
This parameter shows the table to define the names of the axes. Parameter CHNAXIS sets
the number of axes of the channel.
CHAXISNAME n
Name of the axes.
Possible values: Any axes defined in AXISNAME.
Default value: Starting from CHAXISNAME1; X, Y, Z...
Associated variable: (V.)[ch].MPG.CHAXISNAMEn
Parameter included in the CHAXISNAME table.
Any axis defined by parameter AXISNAME may belong to the channel.
When defining the axes, bear in mind that the order in which they are defined determines
their index in the channel. The index of the first axis of the table will be ·1· and so on. As with
the axis name, the index in the channel permits identifying the axis in PLC variables, marks,
etc.
The order of the axes and work planes (mill model).
The order of the axes in the channel sets the main work planes, those selected with functions
G17, G18 and G19. Function G20 may be used to form any work plane with the axes of the
channel.
The order of the axes and work planes (lathe model).
The order of the axes of the channel and parameter GEOCONFIG set the main work planes.
Refer to the parameter for further detail.
CHAXISNAME
CHAXISNAME n Name of the axes.
CHAXISNAME n Index in the channel.
CHAXISNAME 1 Index ·1·.
CHAXISNAME 2 Index ·2·.
CHAXISNAME 3 Index ·3·.
Plane. Abscissa axis. Ordinate axis. Longitudinal axis.
G17 CHAXISNAME 1 CHAXISNAME 2 CHAXISNAME 3
G18 CHAXISNAME 3 CHAXISNAME 1 CHAXISNAME 2
G19 CHAXISNAME 2 CHAXISNAME 3 CHAXISNAME 1
To Next Page
Loading...
