Fagor CNC 8060 - Page 773

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·773·
Variables related to user tables (zero offset table).
·xn· Name, logic number or index of the axis.
Remarks.
The numbering of zero offsets G54 through G59 is always the same; G54=1, G55=2, G56=3,
G57=4, G58=5, G59=6.
(V.)[ch].A.COARSEORGT[nb].xn
Variable that can be read and written from the program and from the PLC and read from the interface.
Variable valid for rotary and linear axes.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
xn axis. Offset set in the zero offset [nb]; coarse part.
Syntax.
·ch· Channel number.
·nb· Zero offset number.
·xn· Name, logic number or index of the axis.
(V.)[ch].A.FINEORGT[nb].xn
Variable that can be read and written from the program and from the PLC and read from the interface.
Variable valid for rotary and linear axes.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
xn axis. Offset set in the zero offset [nb]; fine part.
Syntax.
·ch· Channel number.
·nb· Zero offset number.
·xn· Name, logic number or index of the axis.
V.A.ORGT[1].Z Zero offset G54 (G159=1). Z axis.
V.A.ORGT[4]0.3 Zero offset G57 (G159=4). Axis with logic number ·3·.
V.[2].A.ORGT[9].3 Zero offset G159=9. Axis with index ·3· in the channel
·2·.
V.A.COARSEORGT[1].Z Zero offset G54 (G159=1). Z axis.
V.A.COARSEORGT[4].3 Zero offset G57 (G159=4). Axis with logic number ·3·.
V.[2].A.COARSEORGT[9].3 Zero offset G159=9. Axis with index ·3· in the channel
·2·.
V.A.FINEORGT[1].Z Zero offset G54 (G159=1). Z axis.
V.A.FINEORGT[4].3 Zero offset G57 (G159=4). Axis with logic number ·3·.
V.[2].A.FINEORGT[9].3 Zero offset G159=9. Axis with index ·3· in the channel
·2·.